ABM DATA SYSTEMS

Our Customers Are Our Business

 

Sales Support:          800.767.7067

Technical Support:    800.729.4226

Fax:          512.215.4110

Direct: 512.388.3250

Email:     SALES

MINIMUM SPECIFICATIONS FOR

CUSTOMER SUPPLIED HARDWARE/SOFTWARE

Dated:  05/04/2011

 

Requirements reflect minimal configurations for Phoenix and/or SignalSafe and all add-on modules.   All hardware components must be listed on the Microsoft Hardware Compatibility List for Windows 2000.  High account or signal volume may require more robust hardware (if more that 3000 accounts or over 7500 signals a month). Contact ABM for configuration suggestions.  Signal Safe can be installed on either the minimum Server or Client specifications.

 

PHOENIX SERVER – Dual Servers for Double Take (redundant setup)

PHOENIX CLIENT(s)

·       Pentium class single processor or equivalent (must perform at 500 MHz or higher) ·       2 GB RAM ·       (2) 80GB or higher Hard Disks (server should be partition with C: and D: drives) ·       CDR/W ROM Drive ·       19” Color monitor (1024x768 resolution) ·       Mouse/Keyboard ·       56K baud External Modem or Internet Access ·       2 Serial Ports ·       1 Bi-directional Parallel Port or USB Port ·       Internal Speaker or Sound Card ·       Ethernet Network Card ·       ** Windows 2003 server service pack 4** ·       DigiPort Server (as required)* ·       TCP/IP Network

·       Pentium class processor or equivalent (recommend 350 MHz or higher) ·       256 MB RAM ·       60 GB Hard Disk ·       CD ROM Drive ·       17” Color Monitor (1024x768 resolution) ·       Keyboard/Mouse ·       2 Serial Ports ·       1 Bi-Directional Parallel Port ·       1 PCI Card Slot ·       Ethernet Network Card ·       Internal Speaker or Sound Card ·       **Windows Workstation/2000 Pro / XP Pro (Windows 2000 required for faxing functionality)     Windows Service Pack 3/ XP Service Pack 2

 

 

FIELD TECH ACCESS – can use client hardware requirements.  (will not run on Windows XP)

 

* Servers must accommodate each Phoenix/Signal Safe receiver license with a serial port.  If all ports will be used by other applications/peripherals, and redundant systems,  ABM recommends the Digiport Servers for port expansion.  A Digiport Server must be installed on the network and requires a separate IP address.

 

Note:  Single workstation systems (customers using the Server as the only workstation) must use Server Specifications.   Server must have internal speaker or soundcard. 

* Servers must accommodate each Phoenix/Signal Safe receiver license with a serial port.  If all ports will be used by other applications/peripherals, and redundant systems,  ABM recommends the Digiport Servers for port expansion.  A Digiport Server must be installed on the network and requires a separate IP address.

 

Note:  Single workstation systems (customers using the Server as the only workstation) must use Server Specifications.   Server must have internal speaker or soundcard.